May 25, 2020
Description
Made a removable stabilizer for Prusa enclosure, it was a bit wobbly because of the open frame.
Predrilled holes in the plastic for the screw and then glued the holders in place and secured it with 2 screws on each side.
Its made for M10 threaded rod.
Printed with Prusament jet black petg.
0,4 nozzle
0.15mm layer
50% infill
No support and no rafts.
2x of each file is needed and a M10 threaded rod.
License:
Creative Commons — Public Domain
7
xp1ratex
