Filament samples (f3d file)

I love Seemonster's filament pattern. They are reduced to the essentials and are not at the same time printer tests, which some others make of it. Thanks for that! :-)

But I wanted to design the printed texts myself. No stickers, no manual writing with unsuitable pens. So I used his template 1:1 as much as possible to add text to three positions on the samples in Fusion 360. In my case: material, color and manufacturer.

To design your own texts, use the attached f3d file.

• Open the file in Fusion 360.
• Double click on one of the sketches "Text Material", "Text Label left", "Text Label right".
• Double-click the text you want to change.
• Enter your own text, click "OK" and "Finish sketch".
• Select "Body - sample".
• Finally choose "File - 3D print" from the menu and click "OK".

BTW: You can also easily resize the samples in Fusion 360. In the menu you will find "Change parameters". There you can set the length, width and thickness of your samples according to your wishes.

I hope this brief guide is sufficient even for non-Fusion experts. Otherwise create a comment. I'll try to reply as soon as possible.

Last but not least: 
A perfect addition is my fully configurable Stackable Filament Swatches Box.

I am looking forward to your Makes! :-)

If you like this model, feel free to check out my others here.