Case for Raspberry Pi CM4 on Waveshare Nanobase B

This is a case for the CM 4 on a Nanobase B Carrier Board with mounted heastink.

Components:
Raspberry Pi CM 4: Any variant will do
Nano Base Board B: Link to Manufacturers site. Got mine from Amazon
CM 4 Heatsink B: Also link to Manufacturer. Available on Amazon.
Optional: M3 thread inserts. Designed for CNCKitchens short M3 inserts

Assembly:

1. (Optional) Seat thread inserts or just print version without inserts.
2. Breakout the pieces for Audio and WiFi if needed.
3. Put thermal pads on the chips of the CM4
4. Put Heatsink through holes of top of the case.
5. Screw CM4 with the short screws (supplied with Heatsink) to the Heatsink
6. Push Nano Base Board on CM4
7. Put bottom onto case. Nano Base will be hold in Place by the bottom.
8. Put in M3x12 Screws