November 27, 2022
Description
8-pointed star for Christmas tree top. This is a symmetrical design that needs to be printed twice and fit together.
There are 4 fitting holes that are designed to fit a piece of 1.75mm filament to attach both sides. This design is considering a 0.25mm tolerance for the fitting holes, so if the fitting is too loose, just use a drop of super glue together with the piece of filament.
Height: 12.5 cm from base to center point
Width: 15.0 cm from one point to the opposite one
Thickness: 2mm
Printing angle: 45º
Layer height: 0.2 mm
Supports: Recommended for the base
Infill: 20%
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Lucas
