Voron Formbot Connector Cover and 3 hole cable anchor at Clockwork 1 Extruder

The Formbot Voron Trident kit comes with a 3 hole cable chain and separate connectors for each device on the extruder.  The Voron part for securing the cables doesn't work (its backwards and the screws are too short), so I modified chain_anchor_3hole.stl to add a zip tie anchor.  

The Voron part for covering the connectors, [a]_connector_cover.stl, is too small for the Formbot connectors so I added 10 mm of volume to it with adjustments to avoid interference at the X end stop and cable chain.  The support in the middle needs to be removed after printing.

cable_spacerV2 is for where the cables go from the print bed to the z cable chain so they are not going over the side of the first piece of the cable chain (see page 241 of Trident Assembly manual)

Edit - reduced the size of the front opening 12/31/2022 and added the small cable spacer.