ADS-B receiver case for Raspberry Pi 4B + RTL-SDR + filter

This fits:
– a Raspberry Pi 4B
– a Nooelec RTL-SDR v5 (or similar)
– a generic 1090 or 978 MHz filter module + SMA adapter

Hardware needed:
– 6 x M3 x 10mm screws (can be longer) for the lid
– 4 x M2.5 or M3 * 5mm screws for mounting the Pi (I used nylon screws)

It's a bit large but should fit most printers (maybe diagonally).

I‘ve cut the printed threads with a M3 tap.

Passive cooling works reasonably well with a heatsink. Make sure to orient it correctly, fins vertical (my photo shows it wrong ;).

Update

Cyclone-6 made a customizable OpenSCAD version of the design: https://www.printables.com/en/model/979301-reverse-engineered-ads-b-case-for-openscad