Bracket made to mount onto shelf

A mounting bracket for mountage on a 20mm thick thing.

I made them for inserting an about Ø15mm aluminium pipe, to hang our touring skins up for drying. As long as there is not too much weight on, they will hold perfectly. The mechanism presses about 1mm on, so the brackets won't come of themself.

I would suggest printing them in PETG or other materials like ABS, ASA, nylon etc.

PLA won't be a good option, because it deforms under permanent load.

There is 1 M3x30mm screw and 1 M3x35(40)mm screw to use to secure the pipes. Therefore you will have to drill a about 4mm big hole into the pipes.