November 28, 2022
Description
This is an ice skate blade cover.
It is a symmetrical design, requiring 4 printed parts in total for a pair.
To form one cover, 2 pieces have to be attached together by an elastic cord, as shown in the pictures. I recommend using a 2.5mm elastic cord.
I printed it out of TPU, but harder materials should work also.
No supports are required.
60% infill should offer enough strength (I guess, have not tested it long enough). It should support your weight on the blades, so it must be strong.
If your blade is shorter, jut cut off 1 cm of the thinner end.
License:
Creative Commons — Attribution — Share Alike
11
fermit
