Prusa Mini Filament Sensor Holder - Improved Base

Remixed "Prusa Mini filament sensor holder" by Štěpík https://www.prusaprinters.org/prints/24951. Use this original link to download the .3mf file for recommended PrusaSlicer print settings and the filament sensor holder arm STL.

This remix is only the modified filament sensor base STL (modified from version "uploaded 6.3.2020").

I flipped the side that the M3x10 screw attaches to the base piece. This gives more room for the X-axis servo cables to move freely. This also allows you more room if you have a handle, filament guide, or other accessories attached to the Z-axis 3030 extrusion (e.g. "Prusa Mini handle" https://www.prusaprinters.org/prints/32330).

I've also created a filament filter and guide attachment for this! Check it out here:
"Prusa Mini Filament Guide + Filter Attachment for Sensor Holder" by blaker9410
https://www.prusaprinters.org/prints/34955-prusa-mini-filament-guide-filter-attachment-for-se

Print instructions

Remixed "Prusa Mini filament sensor holder" https://www.prusaprinters.org/prints/24951. Use this original link to download the .3mf file for recommended PrusaSlicer print settings and the filament sensor holder arm STL.

0.20 mm Quality (Layer Height)
Generic PETG
No Supports
30% Infill
No Brim