Decorative Snowman w/ Beanie

Here's a cute winter snowman. Each piece can be printed separately in whatever color you desire, and the pieces slide together and can be glued in place. I've also created an optional beanie the snowman can wear.

Printing Instructions:

• No supports required except for the beanie and scarf.
• I had to reduce temperature of my PLA to 185 and print slowly in order for the bottom rounded sides of the 3 spheres to print properly.
• If bed adhesion is an issue, a brim may be required for the eyes/buttons/nose.
• Printed with PLA at .16mm layer height
• I used 10% infill for everything except for the beanie, which I used 15%.