November 30, 2022
Description
@MediaMan3D's original back lifter didn't fit my X1. I've just used his model and trimmed the insert slots so they fit!
I also removed the curved finger grooves as those supports didn't come of very smoothly when sliced with BambuSlicer.
Printed on X1C, 0.4mm nozzle, 0.28mm layer height, 4 walls, 4 top/3 bottom layers, 35% infill, using Overture White PLA at 240C.
Supports were added for the under the handle.
License:
Creative Commons — Attribution — Noncommercial
7
Avianna
