Snowman Vasemode in Light or Standart Version

My version of a lowcost snowman. You dont need alot of material, the snowman is printed in vasemode. The other parts are standart prints. The snowman is 24cm tall.

For the best effect print the snowman transparent but you can choose what you like most.

Simply put all parts together, they fit very well. No glue or screws.

For the lighted version i used https://www.amazon.de/Batteriebetrieben-Fernbedienung-Schrankbeleuchtung-Vitrinenbeleuchtung-Unterbauleuchte/dp/B0919SQG7C/ref=sr_1_6?crid=2DHV9XOJ54PNV&keywords=led+spots+rgb&qid=1669916254&sprefix=led+spots%2Caps%2C116&sr=8-6

There are some other version of this light but they have all nearly the same size. So look at the cheapest one. The size of the bowl is 90x43mm. The snowman slips 10mm inside the cup. So the lightspot should not be bigger than 90x33mm.

If you dont like the light snowman, you are free to not use a cup at the bottom but it lookts better if you take the smaller cup. I also put Fuzzy skin in the slicer on the outside for better looking.

I printed the snowman with a 0,6 nozzle in vasemode but 0,4 works also for all parts. Only the hat has a little infill 20% is ok.

Colors i used: PETG transparent, PLA black, neon orange and pastel blue.

Merry Christmas