December 2, 2022
Description
I was inspired by Elothan's https://www.printables.com/model/272115-knurled-m3-m8-thumbscrews but I wanted some which would look right on my Star Wars themed Voron V0.1.
These are all meant to be printed with the hex side down and require no supports (forced bridging in the holes).
You will need an M3 nylock nut per thumbscrew and they will work fine with any length M3 so long as they are fully threaded.
License:
Creative Commons — Attribution — Noncommercial
9
KeiranSolaris
