Big Einsy Case Cover - Circuit - MMU2S

I designed this cover to work with the Big Einsy Case. The cover is designed to be printed with MMU2s (or any other multi-material platform). 

This cover still uses the same hardware as the original cover. There are circuit shaped cut outs to make sure there is sufficient airflow. 

I printed mine with Prusa Orange PETG Prusament and Jet Black PETG Prusament. I would strongly recommend printing this with PETG because the residual heat from the print bed and the motherboard can cause the cover to warp. 

I printed mine at 0.2mm layers with the detailed setting. It took around 5 hours, with eight tool changes. 

I designed this using Fusion 360 and Tinker Cad. 

Happy Printing