Bathroom tissue box dispenser- wall mounted

Wall mounted tissue bathroom dispenser - designed to be used for Israeli for Shabbos / Shabbat tissues.

Sizing: designed to fit 2 types of tissue packs sold in Israel:

• small form factor: 125mm long, 95mm height and 45mm deep
  • one can be stacked on top of the other
• elongated form factor: 170mm long, 95 mm height and 40mm deep

Mounting: It has 2 vertical and 2 horizonal holes - depending on where the most optical location for the dispenser is in relation to the wall tiles (to be able to drill in-between tiles).

Design: its not cheap on plastic - came out to 175 grams with 3 walls and 40 percent infill. The 5mm walls don't help it either. Takes around 20 hours of print time! However, its quite sturdy and should last a long time. I tried making a less plastic intensive versions, but they snapped (making floor and walls have an hollow pattern), but that made the thing too fragile (especially if you have small kids).

The “round” top design was just a quick way to take off the sharp edges and save on plastic.

The fit is not supper tight and not too loose. When the pack has only a few tissues left they still get pulled out quite nicely. The sides prevent the pack from coming out till the end!

Changelog:

• 2.7 - added support for the top part so its harder to snap off
• 2.6 - first iteration released

Designed in tinkercard: 

https://www.tinkercad.com/things/0Xwgk8odeGr-bathroom-tissue-box-dispenser-v27-wall-mounted