Voron Cube Styled Piggy-Bank

The next Voron will surely come. So here's the piggy bank.

[bk] these parts are printed in the default color, black in the drawing
[a] these parts are printed in the accent color, red in the drawing
__0x indicates the quantity of parts required

The middle part should be printed with Brimm if necessary. All other parts are without support. The logo parts can be attached with superglue or by melting the pins inside the middle part. Use a 3mm drill for nice round holes to attach the logo parts.

Updated Version for faster printing with 0.4 Nozzle. All Perimeters are optimized for 4 Walls so there is no infill or gaps to fill. Also combined lower part with middle part so there are only 2 parts for the piggy bank.