Tado° Stand

I designed a Tado° Thermostat Stand myself inspired by the Stand from Tado°: https://www.tado.com/se-en/add-ons

Instructions:

Print a pair from both Clips and look wich one fits better. The design is not perfekt so if necessary use a little bit glue or us m3 screws.

Tado_Stand:

I recommend to print the stand sideways.

Infill:

20%

Tado_Clips:

Infill:

100%

Printspeed:

5-10mm/s

Category: 3D Printing