Reolink doorbell accessories

Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one.

I found that I needed a bit more spacing between the screw holes which are on the metal mounting bracket so I made an additional part that mimics the included angled wedge, just without the angle. The metal bracket can be mounted on it, as on the original and then the whole thing screwed in to the wall.

Update 05.01.2023.:

Added a bracket with an integrated cover for an existing doorbell hole. Also added two more wedges with a downward angle of 5 and 10 degrees respectively, to have the possibility to position the doorbell so it can see packages by the door as well.

Update 06.01.2023.:

Added two more wedges, these are angled horizontally 5 & 10 degrees. The original Reolink wedge is angled 15 degrees.

Update 04.04.2023.:

If you need a wedge with a larger angle take a look at Chris's 30+ degree wedges.