December 10, 2022
Description
See original for installation instructions: https://www.thingiverse.com/thing:2029972
My original printing broke right above where the bowden tube and nut fit. Also, my MPSM has a thinner nut than the original accounted for.
To fix those two things, I have made it taller, so that the piece above the nut is much thicker and stronger, and I've also included a version that fits the thinner nut (2.5mm) that my printer has.
I've been playing with heated enclosures and it seems like my original one warped due to heat, so I printed this one in ABS. We'll see if it does any better...
If you want to tweak this, I've included the scad I used, but you'll need to download the original stl before it'll work.
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.35
Infill:
22
Filament: Pxmalion ABS Clear
Notes:
I printed mine at 0.35 mm layer height, and either the change in material, something about how I remixed the STL, or the thick height made all the holes too small. I had to drill out the hole for the bowden tube on both sides, and the mounting screws had to cut their own threads through the plastic. I like the result though -- everything is super tight.
License:
Creative Commons — Attribution
7
jdanders
