Nozzle Neon Sign (EL Wire)

This is a very easy and cheap way to make a cool neon sign ✨

The wire I used is called EL LED Wire and you can get one at amazon, ebay, aliexpress…

I got one here (costs around $7):

https://www.amazon.com/dp/B0B464B3TY

The wire I used was 3m long and about 2mm thick. There was plenty leftover and it can be cut away at any point. 

Just make sure you start here and push the wire all the way through. 

Until it's in like this.

Then you just push it into the grooves (you can use something dull to help).

It should look like this at the back at the end. 

You can reuse the wire in case you want to make something else, this is not permanent :) 

Have fun