Upgraded fan duct (exposed print head setup) for Anycubic Kobra Go

You'll be able to replace your original print head housing with this exposed print head setup using only the original screws.
SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only touching build plate with a 1mm x/y distance and a 50 degree overhang angle.
ASSEMBLY: (see photos) step one - drop the part cooling fan into the fan duct. screws are optional here because it should be a very snug and secure fit. Step two - fasten the hot end cooling fan using the 16mm screws. Step three - fasten the housing to the print head using the 12mm screws. Step four - Print and enjoy your new surface quality and overhang abilities!