E3D SnowMoBenchy -V2 !

V2 check it out! 

Before Printing , please read as setting should apply: 

https://e3d-online.zendesk.com/hc/en-us/articles/4405683309853

Here's my remix, just in time for the contest …

Thanks E3D for the original design!! 

I am printing on an ENDER 3 V2 with an upgraded metal extruder arm, and steel extruder wheel. 
 

Settings: 

PLA
nozzle temp: 208'c

Speed: 30mm/s 

Retraction enabled 

Coasting enabled (and disabled check files) 

Printed with supports (and without check files) -little skis on trailer and buggy kept breaking without so beware, especially when removing from baldpate. 

the trailer had a hard time printing without supports… am currently trying @ 10mm/s because. 

PETG

had best results with this, no stringing, and is a little more water resistant to try out in the snow. 

nozzle temp: 252''C

speed: 30mm/s 

slow down g code on first birdge layer for bottom of buggy & roof for best results (I did 50% on my printer, then changed back to 100% speed for the rest of the print) 

 

Happy Holidays everyone!

EDITS: 

+ Added a 1x1 GRIDFINITY trailer!!  DEC 10

typical 2x6 magnets to display your prized 1x1 Gridfinity misc items, 

+ Reworked G-code 
 

Upcoming:

skis re-work - not thick enough

flat deck trailer for all the ED3's (train display)

REWORK CREDIT AND ORIGINAL FILES /  INSPIRATION:

Reworked - Cali Tralier: https://www.printables.com/model/258049-the-benchy-cali-trailer

(go give this thing a like)  as well as this competitor: 

https://www.printables.com/model/320875-e3d-cart-for-towing-the-benchy-and-cali-trailer

check the contest for the original E3D buggy! 

MISC:

Printed in PLA (Overture)
https://www.amazon.ca/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B082W5HRVM/ref=asc_df_B082W5HRVM/?tag=googleshopc0c-20&linkCode=df0&hvadid=335186231510&hvpos=&hvnetw=g&hvrand=6234056226918516814&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001335&hvtargid=pla-913831687430&psc=1