OctPrint Camera Bracket

I used a 3D printer to make a bracket that supports the camera and a case that holds the electronic circuit board.

I used a Raspberry Pi Zero 2 W for the OctPrint computer.　The method of attachment to the main unit is as follows.　https://www.printables.com/model/338953/edit

The camera uses SUNNY Raspberry Pi Camera Rev1.3.   Bought from Aliexpress for 4$. 

The cable that connects the Raspberry Pi Zero 2 W and the camera is I used FFC ribbon cable. 30 cm long. That length covers the entire Z axis.　I bought it from aliexpress for 2$.

I used PETG filament. No raft, no brim, no support.