Swedish snow lantern (snöbollslykta) with hollow snowballs and space for an LED light

A traditional Swedish snow/snowball lantern for both indoor and outdoor use, that can be used with an LED light source. The snowballs are hollow for a better light transfer and to save on filament.

If you like it or even make one please post it, like, share, and consider a Paypal donation. Thank you!

There is an Indoor version and an Outdoor version.
The Indoor version has openings between the snowballs for light to shine through a bit more.
The Outdoor version has an extra layer between the snowballs to make it a little more “weather-proof”.

All the pictures are of the Outdoor version v1.

Each of the versions have a v1 and a v2,
V1 needs support (touching build plate) for the bottom of the balls.
V2 has built in support and should print as is with no support in the slicer.

There is one test print to see if your printer can handle the overhang/bridging on the top part of the balls and one test print for the V2 built in support.
 

*UPDATE:  Use 0% infill

Printer: Bambu Lab X1 Carbon
Nozzle: 0.4
Line width: 0.42
Layer height: 0.2
Support: Depends on which version you print.
Material: Any, but preferably a transparent filament.