Christmas Version Lihophane Lamp Box (dual color, one nozzle)

This is a remix of my previous project so below I will post the same description of the old project. Check it out if you like this job:

----------------------------------------------------------------------------------------------------------------

If you like this project, take a moment to buy me a virtual coffee … 

If this project reaches 400 downloads and 20 likes in a month I will publish the Fusion 360 integral project file (format .f3z and .stp) on this page.

But now LET'S GO!

If you don't know what a lithophane is:

If you want to print a perfect lithophane:

And now the BOM:

• n°4 screws M3x6(minimum)
• n°1 cable like this: https://www.amazon.it/cablepelado-Cavo-alimentacion-interruttore-1-5-Metri/dp/B079H3ZT9C/ref=sr_1_2_sspa?keywords=cavo+con+interruttore+e+spina&qid=1670370920&sprefix=cavo+con+interr%2Caps%2C277&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 or https://www.leroymerlin.it/prodotti/elettricita-automazioni-e-smart-home/fili-e-cavi/cavi-elettrici-e-fili/cavo-con-interruttore-in-pvc-l-150-mm-nero-34649846.html?src=clk 
• n°1 E14 light holder like this: https://www.leroymerlin.it/prodotti/illuminazione/illuminazione-per-interni/lampade-da-soffitto/accessori-per-lampade-e-lampadari/portalampade/portalampada-e14-36542520.html?src=clk#component-displaycomp
• n°1 E14 lamp
• n°4 Lithophane 100x100x3.2(deep)
  How to create a lithophane?

1. Crop a photo to square format
    
2. Go to https://itslitho.com/ 
   Blow the settings to use

Assembly Manual:

In the download section you can download two videos:

1. Exploded view of the Project.

2. Methods of closing the cover screws

Thanks for your attention

Follow us and contact us for other requests: