February 13, 2024
Description
https://www.buymeacoffee.com/maxt
----------------------
UPDATE 17th Dec 2022: Updated "Christmas Lantern Box - Middle.stl" as the holes at the bottom was a bit offset. My bad!
IF YOU LIKE THIS MODEL, CONSIDER ALSO DOWNLOADING ANOTHER MODEL OF MINE: Christmas Lantern - Shadow Style, 3 different motifs in one, for LED/electric tea candle
This model has 9 different sides/motifs so you have the possibility to change and rotate those in whatever way you please. I suggest printing just 1 side first to see how it fits in the bottom model. Using PLA+ here it fits perfectly, but it still needs some attention to get it right. If you're the type of person that gets easily frustrated, scale the side models down by 1-2%.
The model will fit on Prusa Mini+ (180x180).
Feel free to size it up or down as you wish.
Enjoy! :)
---------------
Print: 0.2mm
Nozzle: 0.4mm
Perimeters: 2
Support: Not needed
Brim: Not needed
Infill: 5%
Fill pattern: Support Cubic
A tip: If you want to get the sides easily off your heat bed, place the heat bed with the printed side model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :)
Do NOT use a real candle. Just don't :)
Use a LED candle - you can buy these for very cheap at a nearest IKEA, dollar store, or mall.
I've used a LED tea candle from Uyuni Lightning as it mimics the flame of the candle in a very nice and pleasant way by glowing up and down randomly. I can also turn it on and off with a remote, or it can be set to light for 6h period at a specific time of the day. It's really great!
Dimensions: H: 5 x Ø 4 cm.
Light source: 1 x CR2450 battery
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
MaxT
