Vortex Viper HST Scope Turret Caps

Turret caps for the Vortex Viper HST scope. These do not come with them from the factory and while hunting they have a tendency to get turned.

I have two designs. A smooth design and one with a lip. The smooth design is difficult to grip to get off. Once you slide it up it will get hung on the top of the turret. Just wiggle it back and forth as you pull and it'll come off. They fit really tight but have a bottom chamfer to help slide it over the turret and have a relief for the turret adjustment knurles so even if the caps turn, the turrets do not. Push them all the way down.

It has a side sight windows to verify that your scope is still sitting on "0" and an upper sight window so you can also see the top line "0" indicator. Fits both knobs.

Print Settings

Printer Brand:

FlashForge

Printer: 

Creator Pro

Rafts:

No

Supports: 

No

Resolution:

0.18

Infill: 

35%

Filament: FlashForge PLA Black

Notes:

I used PLA to test print. I would use ABS or some other material. Rafts, brims and supports not required. Print with flat side down. 3 shell layers, 4 top and bottom layers. 35% hexagon infill.

Category: Sport & Outdoors