Adjustable Mini Quad Runcam Mount (GoPro style Mount)

Runcam 2 mount based of off SnappyFPV's Runcam 2 Diatone Crusader mount. Made to use gopro mounting sytem - you'll need the gopro bolt and nut (preferably the short bolt handle thing as opposed to the standard longer one).

The base of the mount was designed to fit a custom designed quadcopter of mine (CQ MK3), which is a one-off. I've included the .skp sketchup files if you want to edit it to fit the dimensions of whatever you are mounting it on. Otherwise the camera mount section itself will fit on any gopro mount.

Ideally print with flexible material for top and rigid for bottom. I printed with Taulman Nylon 910 and it works beautifully. All you need to do is cut on of the pillars next to the camera lens (as can be seen in pic above) in order to slide the Runcam 2 inside, as while Taulman's Nylon 910 is flexible its not flexible enough to slot into the top.

I placed the camera mount sideways on the build sideways, and the base with its base downwards. Print with whatever infill you like, obviously the greater the better if you don't care about weight and prefer strength. Then again Nylon 910 is ridiculously tough, so mini-quad guys can get away with much lower infill if they use this filament.

Category: R/C Vehicles