LED wire end cap 2020 extrusion with added switch

I added a little plate to add a switch for the LED lights. The switch I used is rated for 250V/15A or 125V/20A, so it is complete overkill, but I really like its look. This is the switch, that I used: https://www.ebay.de/itm/10x-Kippschalter-SPST-12V-24V-250V-Volt-15A-EIN-AUS-ON-OFF-2polig-Auto-KFZ-Boot/133229766492?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2057872.m2749.l2649

The originalby Chris Riley: https://www.thingiverse.com/thing:3952294

Print instructions

Category: 3D Printer Parts Summary

I added a little plate to add a switch for the LED lights. The switch I used is rated for 250V/15A or 125V/20A, so it is complete overkill, but I really like its look. This is the switch, that I used: https://www.ebay.de/itm/10x-Kippschalter-SPST-12V-24V-250V-Volt-15A-EIN-AUS-ON-OFF-2polig-Auto-KFZ-Boot/133229766492?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2057872.m2749.l2649

The original by Chris Riley: https://www.thingiverse.com/thing:3952294

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: No

Supports: Yes

Resolution: 0,2mm

Infill: 20%

Filament: OWL-Filament PLA light grey