K-Fee Kapsel Organizer

Since I couldn't find an organizer, I tried to create my own version.

This is now the first try. The printing is still pending, but the settings I will try first are already entered.

The organizer has a height of 215mm, that means it fits 7 capsules. I chose this height because my printer has only an area of 230x230mm. If everything fits, I will upload another version for 8 capsules, because there are always 8 capsules in the packs.

K-Fee-System -> https://www.k-fee.com

Update 2020-12-09

After the first test print I found out that my clearance between the capsules and the inner wall is too big. The capsules can turn in all directions, I fixed this and uploaded another version of the .stl files.

Update 2020-12-22

After successfully checking the dimensions of the second version, I printed and hung a few of these dispensers see photo.

I have also added an extension to the STL files, which can be made over the lower parts to store more capsules.

Print Settings

Printer:

Artillery Genius

Rafts:

Supports:

No

Resolution:

Infill:

20%

Filament:

Das Filament PLA

Blue Perl

Notes:

Category: Kitchen & Dining