Twotrees Sapphire Plus Spool Holders

Spool holders for Twotrees Sapphire Plus...

Among other things wrong with the Twotrees Sapphire Plus, the bolts protrude from the stock spool holder, leading to some filament spools becoming caught/jammed against them...

I decided to design a couple replacements. These use the stock bolts and T-nuts to attach to the printer. The improvement is that the bolts are now recessed so they don't snag on filament spools with plastic ribs.

I should've looked around on the web before designing these. It looks like there are several good spool holders already out there probably with more thought put in... I figured I would go ahead and make these available in case someone was looking for something a bit different.

"sp5_spool_holder1" prints vertically and is a bit smoother than the other. Be sure to turn up the perimeters if you want it strong enough to take some abuse...

"sp5_spool_holder2" prints on the side, is inherently stronger and accommodates larger spools.

Enjoy!

Print Settings

Printer:

Twotrees SP-5

Rafts:

Supports:

No

Resolution:

Infill:

Cubic

Filament:

Duramic 3D PLA+

Blue

Category: 3D Printer Parts