Drill bit box, standing upright, double hinged

Object description:

This is a upright standing drill bit case. The two hinged covers allow easy access to the drill bits.

A hole on the top can be used to hang the case on a hook.

A gridfinity holder is also available to store the case in a existing gridfinity system.

Important notes:

I recommend PETG for the covers. This material provides the best flexibility for the lock.

Models provided are including paint on supports.

To avoid backlash, the holes of the covers are a bit too tight after printing because of the seam. A short careful manual post-processing with a 6mm drill gives best results for a backlash free fit.

Print settings:

Material: PLA, PETG, ASA/ABS.

Resolution: 0,2mm

Infill: 15%

Perimeters: 2

Brim: no

Support: for covers: yes, for base: no