Accessory Bins for AnkerMake M5

These are accessory side bin/tool tray for AnkerMake M5. 

For Accessory Bin2 with simplified printing and assembly, please see this link

I created these to hold leftover filament from skirts, brims, and fallen supports. 

In this package, two side bins that can be adhered to the deck of your M5. One tall bin that can be used for trash and refused filament so the material can be collected and recycled. One shallow bin for your favorite scraper, tweezers, and other tools. 

Included are two optional footprints to be mounted via 1/2in(14mm) double-sided tape or 3M command strip so that bins will stay in place. There is also one divider that can be used on either bin for organizing your favorite contents. 

The bins also have slots for 5mm diameter x 2mm thick disk neodymium magnets so the bins don't escape from their footprints. This project can be printed flat, walls pointed up at 15% infill with supports for underneath to be used with the footprints.  I recommend printing one footprint and bin at a time so you can affix it prior to the next print. 

Updated 12/21/2022: 

• Updated license. 

Updated 12/21/2022: 

• Added a clipped edge to the bin. (v0.1)
• Added detachable segmented divider for the tool tray. 
• Also added an experimental magnet ready set.  (v0.5 - yes two updates in one day) phased out

Updated 12/23/2022:

• Consolidated the two types of designs to one (v0.8)
• Added another clipped edge to accommodate the extruder head during bed leveling.
• Added some tolerance for the 3mm magnets. Gluing may be necessary

12/24/2022: Christmas Eve: 

• Finalized the design. We are now onto v1.0!

12/27/2022: TOO MANY BINS

• added experimental type with side saddle bins. You get 8 bins total! Tentative names: The Arbingeddon, The Jorbingandr, Judgebin Day… I don't know. This was at the request of GeorgeP from the unofficial M5 discord. 

1/13/2023: Happy New Gear! Welcome to v2.1

• Received enough feedback on the experimental to make appropriate updates. The crazy bin project is coming soon in it's own page
• Updated the standard bins to 5mm magnets so the snap is more satisfying
• Added some broader tolerances as some users are having assembly issues. I hope this helps you
• Added some print recommendation layouts. Including setting supports

2/5/2023: Small adjustment. 

There seems to be some tolerance issue with newly released printers. The bed may sit left/right over by 2mm. So I've added a 3mm gap to the bin to prevent Y-Table collisions.