GoPro 9/10/11 - Rugged Case (2 Variants)

The case is based on my parameterizable "Rugged Box".

A GoPro 8 version is available here.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Versions

Two variants are available:
1 GoPro and 1 battery, plus

• 2 SD cards and an additional battery cover
  (This case is wider and also fits the GoPro with the Pass-Through door installed)
• 4 SD cards

Assembly

You will need six M3x20 (4 SD cards) or M3x25 (2SD cards) screws to assemble it, and a piece of (soft) foam (9-10 mm thickness) to put into the lid.