December 22, 2022
Description
I designed this pry tool to change the incandescent bulbs in my vehicle to LED. This worked well for removing door panels and lens covers.
The default size is the smaller one in the picture. I recommend printing 3 of them. 1 x normal size, 1 x 50% larger, 1 x 100% larger. Scale them in your slicer of choice.
Please post your makes and comments.
Printer:
Hatchbox Alpha
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
33%
Notes:
I printed mine at 33% infill. I print most everything using 33%. I don't think you need 100% for these tools. If you needed 100%, you're probably applying too much pressure to the lens cover or door panel. These are quite strong at 33%.
License:
Creative Commons — Attribution
8
Mistertech
