LED lamp 10w module socket

Socket for 10W LED module for mounting on beam, racks, shelf etc with or without coolplate. For currents up to 200mA (9V) or 60mA (27V version) no coolplate is required, otherwise use 1mm thick aluminium plate 100cm2. No PLA layer allowed under the coolplate screws.

Pull two bare 0.5mm copper wires through the slots (photo) and solder in the LED module. Screw terminal can hold the series resistor as well.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/dMPUOEShk9g

Print Settings

Printer Brand:

Anet

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: any PLA any

Category: 3D Printing