Bluey and Bingo (Regular, Holiday/red hat and Tree Ornament Versions)

This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS.

Print notes

When imported on cura the models are auto-enlarged to 10000%. Don't know why yet--a Nomad thing I assume. Uniform downscale to 5000% for figures of the size that appear on the pictures. 

Bingo: 60mm X, 61mm Y, 97mm Z
Bluey: 70mm X, 65mm Y and 117mm Z. 

Regular (no hat versions) are slightly smaller.

Easy-ish print. I used normal supports touching the build plate only. 0.2 mm height. Notice the models have holes at their feet so they can fit on their respective bases. The holes inside of the feet do not need support so use support blockers on that area. However, this reduces the surface area of the model and can lead to in some cases to layer shifting way down the print. I strongly suggest you use a raft, or at least glue when printing to reduce the chance of sad times.

3 versions!

Each character comes with three variants: regular, Holiday and Holiday/Christmas Ornament. They are all compatible with the included base. The Holiday Ornament versions have a small hole running from the top of the head to the upper part of the back to thread wire and place it on a Christmas tree (or earring or necklace or charm, etc.). See attached pictures for reference.

Happy printing and happy holidays!