AzureFilms sample spool

Since i made enclosure for my prusa i3 i was wandering how i will print the sample filament that are not on spools. So i decided to reuse empty spools frome AzureFilm and wind samples onto them. I wanted to maximise the space on the spool so i devided the spool into 3 slots. it looks nice :)

You can print howmany of the holders as you want (i went with 3 and spaced them evenly on spool). To mount them on the spool i just used some zipties and passed them trough mde hole in the holder and tighten them good. After that just start with the winding proces.

Since the part that is printed is not complicated, just print it with normal settings you use.

If you have any questions pls write them and i will try to respond :)

Happy printing.