December 24, 2022
Description
The frame can be printed without support. See pictutres.
The part for the fan and airflow was made with a minimum of support. See the left picture of the slicer picture.
The airduct covers the TMC2208's perfect. No need to caulk.
NOTE: I soldered off the power plug of my board! If you still have the plug, then you have to make a hole in the front panel!
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Resolution:
0.2
Infill:
15
Filament:
Surreal PETGBlack
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Fritz We
