Fibaro dual switch FGS-2xx Housing

This is a housing for the Fibaro single/double switch 2 unit.
It combines a hard colorFabb_XT outer shell (black) with colorFabb's nGen_FLEX sealing parts (grey) to provide a housing which should be suitable for outside use.

Print instructions

Printed in colorFabb_XT (black) and colorFabb's nGen_FLEX (grey).
Used 100% infill to create the strongest possible part.

All parts can be printed without support.

Assembly

The main section has space for 4x M3 heat set brass inserts to create a strong connection between lid and base.
The seals around the wires allow you to easily take the whole bundle out quickly to make wiring a lot easier.

When mounting to the wall you can take the wires out for better acces to the screws in the bottom. After that just install the wire bundle with the sealing parts and screw down the lid nice and tight.