Beer crate insert for LR44 and similar

In addition to my multi purpose beer crate button cells insert (https://www.printables.com/model/179090-stackable-beer-crate-for-cr2032-and-other-button-c) I made an insert for LR44 type  and similar. This insert is meant to be used with the CR2032 crate from linked model.

Print Instructions

• print beer_crate_CR2032.stl from linked model as base
• 5% infill
• 2 Perimeters
• 0.2 layer height
• use 3 perimeters from 9 mm height to top for stronger handle
• PLA works good

For the insert with the handle, please consider your material choice, brittle material could lead to a snapped of handle. Perhaps tweak your print settings to your needs…. and in general the handle is quite stable, but in the end it is still plastic and should treated gently.

see my other beer crate mods too: https://www.printables.com/social/113164-antimaterie/collections/403088

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

Hope you enjoy my models.