Simple Twist Open Barrel

This remix of the tricky Barrel Cooper's Puzzle Box turns it into a simple twist lid container.

https://youtu.be/sBsHtqxGVIw

Options

• Optional Stand
• Optional DK Logo available here
• Leave top of the barrel open or cap it off with a lid.
• Leave the bottom of the barrel open or cap it off with a lid.

Printing

• All parts print without supports
• If printing the optional DK logo, swap the filament mid-print to help the text stand out.
• Add a brim to the hoops if bed adhesion or curling is difficult.

Assembly

• Slide the separately printed barrel hoops over the barrel until they snap into their tracks. Add glue if the hoops do not snap tightly in place.
• If you want the barrel lids to be permanent, glue those into place.
• If printing the optional stand, secure the stand pieces by gluing them together or by inserting a short piece a filament as a “pin”
• If printing the optional DK logo, glue the logo stem onto the side of the barrel where desired and glue the logo onto the stem. The logo can be oriented horizontally or vertically as desired.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license also does not cover the optional “DK” Donkey Kong logo. Prints of that logo cannot be sold due to being based on an existing IP.

Click here for attribution examples