January 12, 2023
Description
Use longer screws to mount the motor to the VZ hextrodurt, you can use nuts behind the mounting plate to secure them
you will also need like 5/6mm m3 spacers between the plate and the CF carriage
you can also secure the mosquito hotend to the plate plus the cooling fan with m2.5 x30mm screws
mount mosquito to extruder using the bondtech's LGX lite alu plate and 2 screws.
Use CPAP with 12mm hose, Philips sells one.
Use Simon vez's cpap mounting files from VZ bot's github page
BL touch offset
Y= -42.80
X= 0
Length of ptfe tube between hotend and extruder : 10.75mm
added 2 new plates one for moons motor and one for LDO motor.
ALso you will need 4x 45mm length m3 screws
added new version titled - 3.5mm for the plate and BL touch, with this the extruder sits a bit closer to the carriage and also the plate has adjustment for the stepper to mesh with the gear
New version -3.5mm plate/parts
Extruder sits closer to the mgn9h
BL touch bracket is mounted ontop of the CF plate that is fixed to the mgn9h carriage
Use philips 12mm capap tube and the duct.
New version BL touch offset :
X: 15.033
Y: 26.086
License:
Creative Commons — Attribution
7
Ryxxi_makes
