P1P Top Mounted Spool Holder

UPDATE 3: Uploaded updated side mount design. Please use the included enclosure screws with the P1P to mount it firmly to the side of the printer (refer to last photo). I also recommend you attach some double sided 3M tape to ensure it will not fall off.

UPDATE 2: A big thank you to @garageliferc for testing the side mounted spool holder. As he tested, it is not a feasible design and as such, I have removed it. I will upload another variant of it whenever it is completed and hopefully it will be better than the one before it.

UPDATE 1: I have now added a side mounted version that takes advantage of the provided enclosure screws and mount points. Please refer to the very last photo for an example.

Based on the Prusa spool holder to fit onto the P1P frame for top mounted spools.

In the event the P1P shakes too much for a simple click fit, I have included two holes so you can screw it into place. Please refer to the attached screenshots to see the placement.

THIS IS UNTESTED. I unfortunately do not have a P1P to print and test it on, so I would greatly appreciate it if someone can make it and verify if it works.