ZX Spectrum S-Video base plate

As an alternative to the ZX Spectrum TV modulator, redhawk668 created an S-Video modulator board.

The original construction uses two nuts to keep the modulator board separated from the mainboard. I prefer to use this 3D printed base plate. It gives the modulator board more stability, and is also insulating the pins of the mini DIN connector from the mainboard.

This print was tested with the modulator board Rev. D, but should also work with the other revisions except of Rev. A.

Printing

Just print the plate with materials like PLA or PETG. Do not use metallic filament, for obvious reasons. Supports are not necessary.