Wall-mounted Kindle Holder

A simple Kindle holder for the Kindle Paperwhite. Other kindles will likely fit into it as well, but that's the one I took measurements from when I designed it. The buttons and charging port are still accessible on the bottom of the device, so it should work fine for charging as well. I may change the design in the future to allow the Kindle to tilt outwards away from the wall so it's easier to remove, but it works pretty well for now.

I mounted it with a single 3M command strip, and there are no mounting holes in it for screws, but you could probably drill a hole if you really wanted to mount it with a few screws, but an adhesive should be fine.

Print instructions

Unassociated tags: Amazon Kindle, Command Strip, Easy print, easy to print, Kindle Paperwhite, Wall mounted

Category: Organization Summary

A simple Kindle holder for the Kindle Paperwhite. Other kindles will likely fit into it as well, but that's the one I took measurements from when I designed it. The buttons and charging port are still accessible on the bottom of the device, so it should work fine for charging as well. I may change the design in the future to allow the Kindle to tilt outwards away from the wall so it's easier to remove, but it works pretty well for now.

I mounted it with a single 3M command strip, and there are no mounting holes in it for screws, but you could probably drill a hole if you really wanted to mount it with a few screws, but an adhesive should be fine.

Print Settings

Printer: Folger Tech FT-5

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: ~30%