December 29, 2022
Description
I adjusted the original bracket to instead have a 19.5mm spacing so it fits US 1x2 wood which is really 3/4 by 1 1/2 inches in size.
I then added a divider that can be screwed from the bottom. This can be placed anywhere along the wood support but is mostly meant to be added at the ends to avoid spools from falling off.
Finally I made a set of labels. Each is really in two parts. First you have the label holder which is the piece that fits over the wood beams. Then you have each label type that can snap into the label holders. They are a tight fit but once in they don't accidentally come out. I made them in two parts so I could print the holder in black and the label in white. Then the text really stands out when done this way. I included a blank label if you want to write or stick something on instead. I've included labels for PC, PLA, PETG, ASA, ABS and TPU.
Printer Brand:
Creality
Printer:
CR-10 MAX
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
25
Filament:
GST3D PLA
Notes:
The brackets can be printed on the side with-out support.
The divider is easy and flat on its side as well.The labels do have to printed with the correct side down. The front face should be flat on the bed so you will need to flip them.
The label holder must be on its side. There is a wider side that should be placed down since the other size is the opening for the label. When printed in this orientation then no support is needed.
Once done push the label in from the opening in the label holder. They are a tight fit with 0.2mm gap but that makes them fit just tight so they won't slide out later.
12/20/2021: I now added the bracket that is adjusted in size to fit US lumber instead of the original metric lumber from Europe.
License:
Creative Commons — Attribution
7
michelluccote
