T Track Slider Half for Jig

Seem kinds of crazy to make this since you can just cut a piece of wood but I had fun making it and learning more about Fusion 360. This is half the track which is symmetrical so you can print two and snap them together to make the full print. The distance between the hole centers is 225mm. The holes should fit a ¼-20 t-track bolt and it should just snap in. Printing this can be a pain since it needs to be fairly accurate to fit just right in the t-track. At some point I may add some width adjustment feature so that it can be fitted to the track. This one is sized to fit perfectly to my track but you can probably do some small adjustments by sizing the print. 

I printed in PLA with the larger part of the bolt hold up so that no supports are needed.