Tealight Mug Warmer (V2 Remix)

Really liked this mug warmer by JezeusCristo but felt it could use a little stablisation and found the feet a bit too sharp.

I've added a ring to the top for stabilisation and weight distribution, and replace the feet with something a little rounder at the point. I also thickened and flattened the feet as I've found this helps with removing supports.

Unfortunately this does add a lot of extra material (and printing time) to support the ring, but I'm happy with how it came out and it supports my favourite mug (95mm/3.75" diameter) wonderfully.

I would advise printing in ABS or other high-temperature material to reduce the risk of deformation near a heat source.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: Flashforge ABS Pro Black

Category: Household