Martian 2 LowRider (20 mm Standoffs)

My take on the Low Mod for Martian 2.

Inspired by: https://www.thingiverse.com/thing:2577387

Full canopy with extra lip/trim/bumper for the bottom plate

Full canopy without extra lip/trim/bumper for the bottom plate

Front only with separate rear parts with /and/or withouth sma/xt60 holes

Cam mount could be attached wit 30mm standoffs with extra wide spacers, or the :hook"file, and the mounthooklockTPU, the last one schould be printed in TPU or something similar for the lock to work.

Other Parts needed:

-A martan 2 frame-kit

-6 x 20 mm Standoffs ( http://bit.ly/2AECGyj not an affiliate link, just the ones i use)

-2 m3 screws with maching nuts 10 mm aprox with 3 mm bottom plate (with 2mm bottomplate 8 micht be enough, but 10 wil work fine )

-all other hardware to get a drone flying to your own choice.

***Updated 3 jan 2018

-runcam swift should fit now,

-space for straps are added

-some other adjustments

***Updated 8 jan 2018

-lower cutout adjusted so the arms fit better.

-some other minor changes

***update 16 jan 2018

-Found a problem, one standoff hole is misaligned, wil fix soon.

***update 17 jan 2018

• Fixed the misaligned holes

***update 9 april 2018

-added front only mount without the cam mount

***update 18 may 2018

-New Front only version including a session "strap-mount"

30 degrees for now, more options to come,..

***Update 16 may 2019

New front for micro cam+gopro downloadable here: https://www.thingiverse.com/thing:3633883

Category: R/C Vehicles